STENCILS:

All boxes are offered with a permanent black ink stencil using 50mm lettering of the customerTs choice on one board on each of the two long sides.(Max 45 characters including gaps) The relevant BS information is also printed on this board. In addition we offer extra stenciling on any of the four sides of the box. This can include a customer's specific requirement such as a logo.

NUMBERING:

If required, boxes can be numbered sequentially.

COLOUR-CODING:

If required, boxes can be colour-coded on any of the four sides using water-based emulsion.

BAR CODE FACILITY:

If required, a rebate at the end of one of the long side-boards can be made to accommodate a customer bar code. Customer bar codes can also be stapled to boxes during the production process.

PLASTIC IDENTIFICATION STRIPS:

To aid in identification of boxes, a colour-coded, plastic strip (240 micron) approximately 100mm x 500mm with a customer's name printed on it can be pressed into the steel connector plate. This then becomes an integral part of the box and almost impossible to remove. The strip can only be seen in gapped boxes, but then is only accessed when proof of ownership is needed.